VEVOR 40W CO2 laseritoru 700 mm klaastoru spetsiaalse kattega graveerimis- ja lõikamismasinatele
- 【HIGH TEMPERATURE RESISTANCE】- This laser tube is made of the boron silicate glass that is also applied on the solar tubes. It is resistant to high temperature and high pressure.
- 【TEMOO MODE】- The co2 laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode.
- 【SPECIAL COATING TECHNOLOGY】- The inside of the discharge tube (imported German Schotter tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.
- 【LONGER SERVICE LIFE】- Our service life of discharge tubes coated with special catalysts is much improved. Compared with other laser cutting tubes, our 40W co2 laser can last longer.
- 【VARIOUS APPLICATION】- Professional 40w laser, one of the spare parts of c02 laser engraving machine, widely used in engraving and cutting acrylic, cloth, leather, bamboo, wood and other materials.
84,68 € Ar PVN 21%
Laost otsas
Kuupäev varude taastootmise teadmata
Tahan olla teavitatud, kui see toode on tagasi laos?
M4I4JZDD
JGG40WCO2JGG00001V0
40W CO2 laser tube
Professional glass laser tube, mainly used in laser engraving machine, laser marking machine and laser cutting machine. It is a spare part for laser machines that can engrave and cut acrylic, cloth, leather, bamboo, wood and other materials. Our CO2 laser tube 700mm adopts the uses German Schoot discharge tube and special coating technology to improve the performance of the laser tube. It is definitely your best choice!
- TEMOO Mode
- High Temperature Resistance
- Special Coating Technology
- Longer Service Life
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
Kvaliteetne Materjal
Using the boron silicate glass as the material, the 40 watt laser tube is with high temperature and high pressure resistance.
TEMOO Mode
TEMOO mode is applied on the laser cutting tube to provide the better high spot concentration and high energy density. Equipped with the output mirror, the mode is further improved.
Special Coating Technology
The special coating technology is used in the discharge tube (imported German Schotter tube). The coating is a reducing catalyst mixed with materials like rare earth and gold.
Pikk Kasutusiga
The laser tube is fully enclosed to prevent gas from diffusing inside. Nano-coating technology is used inside to increase the output power and extend the service life. Note: After generally working 3-4 hours, it should pause for about 30 minutes.
Stable Power
The 40 watt laser uses German Schoot glass tube. Special treatment of the discharge tube improves the laser output and reduce power attenuation.
Laialdane Kohaldamine
The co2 laser tube is perfect for laser engraving machine, laser marking machine, laser cutting machine and acrylic cutting ect.
Kirjeldused
- Power output: 40W
- Length: 700 mm
- Beam diameter: 2.5 mm
- Wavelength: 10.64 microns
- Material: Boron Silicate Glass
- Outer diameter: 50 mm
- Trigger voltage: 20KV
- Working voltage: 16KV
- Optimal operating current: 10-13mA
- Gross Weight: 5.13kg(11.30lbs)
- Package Size: 90 x 20 x 16cm/35.43 x 7.87 x 6.29inch
Pakendi Sisu
- 1 x Laser Tube
Spetsifikatsioon
- Power output
- 40W
- Pikkus
- 700 mm
- Beam diameter
- 2,5 mm
- Lainepikkus
- 10.64 microns
- Materjal
- Boron Silicate Glass
- Outer diameter
- 50 mm
- Trigger voltage
- 20KV
- Working voltage
- 16KV
- Optimal operating current
- 10-13mA
- Bruto Kaal
- 5.13kg(11.30lbs)
- Pakendi Suurus
- 90 x 20 x 16cm/35.43 x 7.87 x 6.29inch
| Kaal | 1,36 kg |
|---|---|
| Mõõtmed | 87,00 × 15,00 × 16,00 cm |