VEVOR 2.2KW 220V veega jahutatav CNC spindlimootor ER20, 8000–24000 p/min graveerimiseks ja freesimiseks, 8cm x 21.5cm
- Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm); Power: 2.2 KW; Voltage: 220V~250V; Current: 8A; Collet Size: ER20; Bearings: 3 bearings; Frequency: 400 Hz; Speed: 8000-24000 R/min; Runout off: less than 0.005 mm. The CNC spindle motor is mainly used for engraving machine or used with frequency converter.
- ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version of the aviation plug can ensure the stability and security of the input power, and the dust cover prevents dust from entering the body.
161,79 € Ar PVN 21%
Laost otsas
Kuupäev varude taastootmise teadmata
Tahan olla teavitatud, kui see toode on tagasi laos?
M4I4JVA5
2.2KWSLDJ00000001V0
2.2KW Water Cooled Spindle Motor
ER20 Collet & Four Bearings & 8000-24000 R/min
Need spindel mootorid vastu imporditud laagrid ja kõrge kvaliteediga roostevabast terasest-materjalid, ja nende eluiga on kolm korda tavalisest spindel mootorid. Laialdaselt kohaldatavad graveerimine masinad puidu, kivi, metalli ja muid materjale.
- Tehnilised Parameetrid
- ER20 Standard Collet
- Võimas Laagri
- Madal Müratase & Soojushajutamise
- Peen Töö
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
Dünaamiline Tasakaal Disain
We use innovative and advanced dynamic balancing technology, unlike other milling spindle motors. The ER20 standard collet's advantages are excellent rigidity, full strength, unique drainage design, and high precision.
Three High-quality Bearings
The upgraded bearing has two significant advantages: superior durability and anti-rust performance. High speed (8000-24000R/min) and strong power bring higher efficiency than before.
Noise Reduction and Water Cooling
Our spindle works with low noise and avoids auditory fatigue. It uses water circulation to cool the heat generated by the spindle at high speed and has a good heat dissipation effect.
Lisatasu Materjal
The stainless steel body ensures greater power and longer life; Unlike ordinary aluminum-clad wire, we use oxygen-free copper coils to ensure high-quality processing and engraving performance.
Rafineeritud Sisemise Üksikasjad
The CNC router spindle is a built-in dust cover design, and the galvanized faucet is not oxidized and rusty. The upgraded aviation plug is simple to ensure stable power input.
Koondtaotlus
Water-cooled motors commonly applied materials such as wood, stone, mold & metal, etc. Suitable for machinery manufacturing, sheet metal processing, guardrails, factories, shipyards, home improvement, construction, and other fields.
Kirjeldused
- Võimsus: 2,2 KW
- Pinge: 220V~250V
- Sagedus: 400 Hz
- Kiirus: 8000-24000 R/min
- Runout off: Less than 0.005 mm
- Product Dimension: 3.15 x 8.5 in / 8 x 21.5 cm
- Weight: 11 lbs / 5 kg
Pakendi Sisu
- 1 x Water Cooled Spindle Motor
Spetsifikatsioon
- Spec
- φ80 x 200 mm (Diameter
- Võimsus
- 2.2 KW
- Pinge
- 220V~250V
- Sagedus
- 400 Hz
- Kiirus
- 8000-24000 R/min
- Runout maha
- alla 0,005 mm
- Toote Mõõt
- 39 x 19 x 17 cm (L x W x H)
- Bruto Kaal
- 5 KG(11.02 lbs)
| Kaal | 5,90 kg |
|---|---|
| Mõõtmed | 36,50 × 16,50 × 15,50 cm |