VEVOR reguleeritav PTO libisev sidur, 35 mm ümarad otsad, 900 Nm pöördemoment, karbureeritud teras traktoritele ja niidukitele
- 【QUALITY PTO SLIP CLUTCH】- The tractor PTO slip clutch is made of advanced 20CrMnTi carburized steel, which has high durability and impacts resistance properties. The black-painted surface is smoothing and anti-weary. Thus, it can withstand higher torque and speed to gain better protection for your PTO shaft.
- 【1 3/8″ ROUND SHAFT ENDS】- Constructed in round smooth ends, this PTO shaft slip clutch has a size of 1 3/8″ for both male and female ends. It fits the PTO slip shaft, matching perfectly with the same diameter of your implement input shaft and tractor output shaft, featuring superior safety functions as shear bolts.
- 【ADJUSTABLE TORQUE SETTING】- With rated torque 900 nm, adjustment range: 20 – 55 hp, you can adjust the overall length of the tension springs to set an appropriate torque for your rotary cutter slip clutch. Just follow the instruction to tight/loose the eight nuts by 1/4 of a turn and check its tightness for correct operation.
- 【REPLACEABLE FRICTION DISC】- The PTO friction clutch adopts an essential spring and disc set up, assembled with fiction discs inside to help transmit forces, allowing two sides of the PTO shaft to spin at different speeds. Considering long-lasting usage, we offer two additional discs for your replacement.
- 【WIDE RANGE APPLICATION】- Adding a slip clutch for PTO is meant for protection. It works as an extra safety line with PTO driven machinery on your tractor to prevent further damage moving up the line, and it is most commonly used on rotary tilling attachments like rotary cutters, brush cutters, rotary mowers, and tractors.
84,68 € Ar PVN 21%
3 laos
VEVOR Slip Clutch, 1 3/8” PTO Slip Clutch, Smooth Round Ends PTO Friction Clutch, Carburized Steel Tractor Slip Clutch, Adjustable Rotary Cutter Slip Clutch, Black Brush Hog Slip Clutch for PTO Shaft
MFM1762G
CDZGZBHQHSZYK0001V0
1 3/8" Round PTO Slip Clutch
This smooth PTO slip clutch is built by 20CrMnTi steel features 1-3/8" round male/ female shaft ends with locking conical pin. It stands out with easily adjustable tension springs, replaceable friction discs and comes with two fictional discs for replacement and with the torque setting chart for your guidance.
- Quality PTO Slip Clutch
- 1 3/8" Round Shaft Ends
- Adjustable Torque Setting
- Replaceable Friction Disc
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
20CrMnTi Carburized Steel
This PTO overrunning clutch is made of high-quality 20CrMnTi carburized steel, with a black-painted surface to strengthen its durability and stand large impacts, higher torque, and speed.
Round Ends Design
Featuring the smooth round shaft ends, the tractor PTO link slip clutch can match with 1 3/8" implement input shaft and tractor output shaft. It stands out with superior protective ability better than the shear bolts.
Adjustable Torque Limiter
Eight tension springs can help you adjust the torque setting. Tighten or loosen the nuts by 1/4 of a turn to increase or decrease the torque and check its tightens for correct operation.
Protective Friction Discs
The friction discs, assembled in the fiction lining, are likely to be worn, so we provide you with two additional discs for replacement. And the adjustment range of our clutch is 20 to 55 hp.
Kompaktne Struktuur
The PTO slip clutch consists of springs, friction plates, pressure plates, and a flywheel, with two round ends attached to the engine/clutch shaft to perform the implements better.
Laialdane Kohaldamine
PTO slip clutches are most commonly used on rotary tilling attachments like rotavators, stone buriers, brush hugs, and rotary mowers. They can also be used as hay tenders, balers, hole diggers, etc.
Kirjeldused
- Material: 20CrMnTi Carburized Steel
- Värv: Must
- Surface Finishing: Painted
- Female & Male End Size: 1-3/8" Round
- Pinhole Size: 1/2"
- Tension Springs: Adjustable
- Friction Discs: Replaceable
- Rated Torque: 900 nm
- Adjustment Range: 20 - 55 Horse Power
Pakendi Sisu
- 1 x PTO Split Clutch
- 2 x Friction Discs
- 1 x Torque Setting Instruction
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
VEVOR on juhtiv kaubamärk, mis on spetsialiseerunud seadmed ja tööriistad. Koos tuhandete motiveeritud töötajad, VEVOR on pühendunud pakkuma oma klientidele karm seadmed ja vahendid, uskumatult madalad hinnad. Täna, VEVOR on hõivatud turul rohkem kui 200 riiki, kus 10 miljonit eurot pluss ülemaailmse liikmed.
Miks Valida VEVOR?
- Lisatasu Karm Kvaliteet
- Uskumatult Madalad Hinnad
- Kiire Ja Turvaline Kohaletoimetamine
- 30-Päevase Tasuta Tagastab
- 24/7 Tähelepanelik Teenindus
1 3/8" Round PTO Slip Clutch
This smooth PTO slip clutch is built by 20CrMnTi steel features 1-3/8" round male/ female shaft ends with locking conical pin. It stands out with easily adjustable tension springs, replaceable friction discs and comes with two fictional discs for replacement and with the torque setting chart for your guidance.
- Quality PTO Slip Clutch
- 1 3/8" Round Shaft Ends
- Adjustable Torque Setting
- Replaceable Friction Disc
20CrMnTi Carburized Steel
This PTO overrunning clutch is made of high-quality 20CrMnTi carburized steel, with a black-painted surface to strengthen its durability and stand large impacts, higher torque, and speed.
Round Ends Design
Featuring the smooth round shaft ends, the tractor PTO link slip clutch can match with 1 3/8" implement input shaft and tractor output shaft. It stands out with superior protective ability better than the shear bolts.
Adjustable Torque Limiter
Eight tension springs can help you adjust the torque setting. Tighten or loosen the nuts by 1/4 of a turn to increase or decrease the torque and check its tightens for correct operation.
Protective Friction Discs
The friction discs, assembled in the fiction lining, are likely to be worn, so we provide you with two additional discs for replacement. And the adjustment range of our clutch is 20 to 55 hp.
Kompaktne Struktuur
The PTO slip clutch consists of springs, friction plates, pressure plates, and a flywheel, with two round ends attached to the engine/clutch shaft to perform the implements better.
Laialdane Kohaldamine
PTO slip clutches are most commonly used on rotary tilling attachments like rotavators, stone buriers, brush hugs, and rotary mowers. They can also be used as hay tenders, balers, hole diggers, etc.
Pakendi Sisu
- 1 x PTO Split Clutch
- 2 x Friction Discs
- 1 x Torque Setting Instruction
Kirjeldused
- Material: 20CrMnTi Carburized Steel
- Värv: Must
- Surface Finishing: Painted
- Female & Male End Size: 1-3/8" Round
- Pinhole Size: 1/2"
- Tension Springs: Adjustable
- Friction Discs: Replaceable
- Rated Torque: 900 nm
- Adjustment Range: 20 - 55 Horse Power
Spetsifikatsioon
- Materjal
- 20CrMnTi Carburized Steel
- Värv
- Must
- Surface Finishing
- Painted
- Female & Male End Size
- 1-3/8" Round
- Pinhole Size
- 1/2"
- Tension Springs
- Reguleeritav
- Friction Discs
- Vahetatav
- Hinnatud Pöördemoment
- 900 nm
- Seadeulatus
- 20 - 55 Horse Power
| Kaal | 7,5 kg |
|---|---|
| Mõõtmed | 20 × 19 × 21 cm |
Arvustust saavad kirjutada ainult need sisseloginud kasutajad, kes on antud toote ostnud.
Arvustused
Tooteülevaateid veel ei ole.