Anycubic Kobra 3 V2 Combo 3D Printer

Anycubic Kobra 3 V2 Combo 3D Printer

Meet the Anycubic Kobra 3 V2 Combo - a 3D printing kit that offers multi-color printing with active drying of the filament to ensure vivid, defect-free prints. The printer features an enhanced LeviQ 3.0 automatic leveling system with a 60mm Y-axis and SG15 bearings to ensure perfect adhesion and flawless first layers, while speeds of up to 600mm/sec and 20,000mm/s² acceleration reduce turnaround time for even the most demanding projects. Thanks to "plug & play" (an installation that, once connected to the hardware of your choice, requires no additional configuration or driver downloads), installation and initial startup take less than 15 minutes, while smart features such as resuming printing after power loss, filament detection and timelapse on the built-in 720 p camera ensure continuous and safe operation. The whole thing is complemented by the powerful Anycubic ecosystem, which gives you full control over every step of the printing process. Also included is the ACE Pro module, which takes care of proper drying of the filaments and allows 3D printing in multiple colors.

A multicolor explosion of creativity

The Anycubic Kobra 3 V2 printer allows you to create extremely vivid models in four or as many as eight colors simultaneously thanks to the included ACE Pro module. In addition, the ACE Pro module guarantees the excellent quality of each print by ensuring that the filaments are properly dried. Whether you are preparing functional prototypes, artistic molds or precise conceptual models, the Kobra 3 V2 printer will expand your imagination without compromise.

LeviQ 3.0 automatinis niveliavimas

Forget about tedious manual table calibration. The innovative LeviQ 3.0 system with a 60 mm Y-axis and SG15 bearings on the X-axis takes care of perfect alignment of each layer. Thanks to the elimination of offsets in the Z-axis, you will get reliable adhesion of the first layer, which significantly increases the success rate of prints even on the most geometrically complex projects.

Greitis ir patikimas veikimas

Jums nebereikia ilgai laukti, kol atspausdinsite savo dizainą Kobra 3 V2 pasiekia maksimalų spausdinimo greitį iki 600 mm/sek (300 mm/sek pagal numatytuosius nustatymus) ir pagreitį iki 20 000 mm/sek², todėl mažos valties modelis yra trumpesnis nei 13 min. Patobulintas antgalis efektyviai sumažina gijų nuotėkį, o optimalus darbinio tunelio plotis užtikrina komfortą dirbant su bet kokiu projektu.

Išpakuokite ir paleiskite

Spausdintuvo surinkimas ir paleidimas užtrunka trumpiau nei rytinė kava - intuityvus, supaprastintas dizainas leidžia pirmąjį spausdinimą pradėti per ketvirtį valandos po išpakavimo Tvirti dvigubi traukimo varžtai, tiksli guolių sistema ir metalinė greito atjungimo jungtis garantuoja viso dizaino stabilumą ir leidžia akimirksniu pakeisti purkštukus, kai to reikia.

Smart monitoring and safety

No more running out of filament during printing or unexpected power interruptions. The Anycubic Kobra 3 V2 automatically resumes operation when power is restored, and a filament sensor detects the condition of the filament, alerting you to refill the material. A built-in 720p timelapse camera allows you to document the entire process, which is great for presenting orders or creating social media content.

Visiška Anycubic ekosistemos kontrolė

With Anycubic Slicer Next (based on the Orca engine), you'll prepare models for printing from the LAN, managing multiple projects simultaneously and skipping unwanted elements. Using Anycubic, you gain remote access to the printer, real-time progress monitoring and a time-lapse photography option. In addition, the Makeronline platform offers a rich library of ready-made models and one-click cutting and printing.

Išsamus funkcijų rinkinys

Anycubic Kobra 3 V2 Combo is more than a 3D printing kit. It's a tool that integrates top-notch automation, multicolor printing, active filament drying and intelligent software. With support for high drying temperatures up to 55 °C, a capacitive 4.3-inch touchscreen, and control via panel, app and USB, you have complete freedom to choose how and where to work on your designs.

Įtrauktas

• Kobra 3 V2 spausdintuvas
• Anycubic Color Engine Pro (ACE Pro) module
• spausdinimo galvutė
• jutiklinis ekranas
• ritės laikiklis
• kabelių laikiklis
• valymo valytuvas
• varžtas M2x14 x2
• varžtas M3x6 x4
• varžtas M4x16 x2
• varžtas M3x10
• M3x8 screw
• power cable x2
• cable organizer x4
• signal cable
• USB diskas
• kaitinamasis vamzdelis
• veržliarakčių rinkinys
• allen varžtai 4.0, 3.0, 2.5, 2.0, 1.5
• kaitinamojo siūlo pavyzdys
• purkštukų valiklis
• tepalas
• Fotoaparatas
• naudojimo instrukcija