0.8kW Didelio greičio oro aušinamas CNC veleno variklis ER11, 220V, 12000–24000 RPM graviravimui, frezavimui ir šlifavimui
- Technical Parameters: Spec: φ2.6 x 8 in (Diameter: 6.5 cm x Length: 20.3 cm); Power: 0.8KW; Voltage: 220V; Current: 2.5A; Collet Size: ER11; Bearings: 4 bearings; Frequency: 200-400 Hz; Speed: 12000-24000 R/min; Runout off: less than 0.002 mm. Mainly used for engraving machine or used with frequency converter.
- ER11 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Powerful Bearing: The air spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed air cooling system has a better heat dissipation effect to ensure smooth operation.
- Wide Application: The CNC spindle motor kit is mainly used for engraving machines or frequency converters. It uses air circulation to cool the heat and has a good heat dissipation effect.
102,89 eur Ar PVN 21%
Išankstinis užsakymas
Tiekėjo sandėlyje bus galima įsigyti per 1-2 savaites.
M4I4K796
0.8KW风冷电机
0.8KW Air Cooled Spindle Motor
ER11 Collet & Four Bearings & 12000-24000 R/min
These spindle motors adopt imported bearings and high-quality stainless steel materials, and their service life is three times that of ordinary spindle motors. Widely applicable to engraving machines for wood, stone, metal, and other materials.
- Technical Parameters
- ER11 Standard Collet
- Powerful Bearing
- Low Noise & Heat Dissipation
"VEVOR" yra pirmaujantis prekės ženklas, kurio specializacija - įranga ir įrankiai. Kartu su tūkstančiais motyvuotų darbuotojų "VEVOR" siekia aprūpinti klientus tvirta įranga ir įrankiais neįtikėtinai mažomis kainomis. Šiandien VEVOR yra užėmusi daugiau nei 200 šalių rinkas, kuriose yra daugiau nei 10 milijonų narių visame pasaulyje.
Kodėl verta rinktis VEVOR?
- Aukščiausios kokybės
- Neįtikėtinai mažos kainos
- Greitas ir saugus pristatymas
- 30 dienų nemokamas grąžinimas
- 24/7 dėmesingas aptarnavimas
"VEVOR" yra pirmaujantis prekės ženklas, kurio specializacija - įranga ir įrankiai. Kartu su tūkstančiais motyvuotų darbuotojų "VEVOR" siekia aprūpinti klientus tvirta įranga ir įrankiais neįtikėtinai mažomis kainomis. Šiandien VEVOR yra užėmusi daugiau nei 200 šalių rinkas, kuriose yra daugiau nei 10 milijonų narių visame pasaulyje.
Kodėl verta rinktis VEVOR?
- Aukščiausios kokybės
- Neįtikėtinai mažos kainos
- Greitas ir saugus pristatymas
- 30 dienų nemokamas grąžinimas
- 24/7 dėmesingas aptarnavimas
Dynamic Balance Design
Unlike other milling spindle motors, we use innovative and advanced dynamic balancing technology. The ER11 standard collet's advantages are excellent rigidity, full strength, unique drainage design, and high precision.
Four High-quality Bearings
The upgraded bearing has two significant advantages: superior durability and anti-rust performance. High speed (12000-24000 R/min) and strong power bring higher efficiency than before.
Noise Reduction and Air Cooling
Our CNC router spindle motor works with low noise and avoids auditory fatigue. It uses air circulation to cool the heat generated by the spindle at high speed and has a good heat dissipation effect.
Aukščiausios kokybės medžiaga
The stainless steel body ensures greater power and longer life; Unlike ordinary aluminum-clad wire, the oxygen-free copper coils can ensure high-quality processing and engraving performance.
Refined Internal Details
The CNC router spindle is a built-in upgraded aviation plug, which is simple to make the current flow and achieve the predetermined function of the circuit, effectively improving the stable and smooth operation.
Platus taikymas
Air-cooled motors commonly applied materials such as wood, stone, mold & metal, etc. Suitable for machinery manufacturing, sheet metal processing, guardrails, factories, shipyards, home improvement, construction, and other fields.
Specifikacijos
- Power: 0.8 KW
- Voltage: 220V
- Frequency: 200-400 Hz
- Speed: 12000-24000 R/min
- Runout off: Less than 0.002 mm
- Maximum Torque: 0.6NM
- Product Dimension: 2.6 x 8 in / 6.5 x 20.3 cm
- Weight: 6.6 lbs / 3 kg
Pakuotės turinys
- 1 x Air Cooled Spindle Motor
Specifikacija
- Spec
- 65 x 180 mm (Diameter
- Galia
- 0.8 KW
- Frequency
- 400 Hz
- Greitis
- 0-24000 R/min
- Runout off
- less than 0.005 mm
- ER11 collet chuck
- (3.175 mm, 4 mm, 6 mm)
- Gross Weight
- 2.7 KG(5.95 lbs)
- Product Dimension(Approximated)
- 10" L x 3" W
- Voltage
- 220V~250V (We also stock 110V~120V item for the country like the USA and Canada. Please contact us for item stock)
| Svoris | 2,50 kg |
|---|---|
| Išmatavimai | 31,50 × 12,00 × 13,00 cm |