Carbon 4D roll film black 1,52x30m

FOIL ROLL CARBON 4D BLACK 1.52X30M

NOTE! When buying this product you will receive one roll of dimensions 1,52x30m.

Do you feel like personalising the interior of your car? Or maybe not just the interior?
And not just your car?

Do you have a scratched windowsill or a dingy piece of furniture?

We have the solution to your problems.

Our thermoplastic veneer film CARBON 4D BLACKis a decorative product. It will give your objects a fresh look - bring them to life! It will perfectly help you stand out from the crowd and break out of the accepted patterns. Our veneer film is the ideal material for inexpensively masking damage and other imperfections.

CARBON film is an increasingly popular material used for the visual tuning of cars. It is used both inside cars and on the outside. It looks like real carbon fibre - a strong material with low weight. Gives the car an indestructible image while maintaining its lightness.

The CARBON wrapping film is also perfect for: motorbikes, laptops, phones, tablets... or bicycles and scooters. In fact, only your imagination limits the use of the film.

1. film properties:

• self-adhesive - the film has a specialised channel adhesive which makes it easy to stick and minimises the risk of air bubbles; the film is easy to install, especially on flat, even surfaces

• easy to touch up - you may be thinking, "what if I stick the film wrong?" Relax! You are even able to get the full strength of the film within a few minutes of first fixing. In the initial phase, the adhesive still "binds" weakly, making it easier for you to correct a mistake

• trouble-free removal - the film can be easily removed using warm air; no adhesive residue is left behind

• flexible and thermoplastic - the foil can be cut to the most diverse shapes. Simply apply heat, which increases its plasticity

• easy to cut - the film has evenly spaced lines on the inside for easy cutting to size

• resistant resistant toabrasion, detergents and even oil and grease

• easy to clean - simply wipe with a damp cloth

• has a structure that looks like real carbon fibre.

2 Installation instructions

Tools useful for installing the film: surface degreaser, scissors, hair dryer and squeegee. (items not included)

NOTE! If you want to use a heat gun remember to keep the correct distance. The same applies to the hair dryer. Too high a temperature can make the veneer sticky.

1) Preparation of the fo il - the foil has evenly spaced lines on its inner side. Based on these, cut out the appropriate piece with scissors. ATTENTION: It is advisable to allow 2-3 cm for wrapping the film underneath the element to be wrapped.

2) Surface preparation - the area where the foil will be applied should be well degreased and wiped. It must be clean and dry.

3) Монтаж the film - apply the film by gradually peeling off the protective paper. For flat surfaces, use a squeegee to apply pressure. However, if you come across curved or uneven shapes, heat up the film using a heat gun, for example. The film will become malleable and with a little patience and precision will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - the channel adhesive minimises the risk of air bubbles. However, if they do occur, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

3. use of the foil

The foil is primarily recommended for interior use. It can also be used outside.

The most common uses for the film are

• visual tuning of a car

• refreshing the look of a laptop, windowsill, phone, bicycle

• masking damage and other imperfections

Caution! There are places and objects to which it is not advisable to adhere the film:

• do not stick to moving parts, e.g. door hinges, as the film may come off

• Do not stick to hot surfaces e.g. exhaust pipes, lamps, oven doors, etc. as the film may burn.

4 Specification

Film type - CARBON

Colour: Черный

Толщина: - 140 microns

Roll dimensions - 1.52x30m

Channel adhesive: да

External: да

Thermoplastic: да

Водонепроницаемый: да

Temperature of use - from -40°Cto +80°C

NOTE! When purchasing this product you will receive one roll of 1.52x30m.