VEVOR 2-в-1 Електричний гнучко-різальний станок для арматури 1700Вт, 0–180°, для сталі Ø4–25мм, швидкий і надійний
- High Compatibility: The rebar bending machine is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
- Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar. Supports bending and cutting diameters ranging from 0.16 to 0.98 inches / 4 to 25 mm within 3.5 to 4 seconds. Bending Angle: 0-180°.
- 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter’s operating life to a large extent.
- Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
- Міцний корпус верстата: Верстат для згинання прутків має міцний чавунний корпус та довговічне натяжне колесо. Чавунне натяжне колесо Gyre діаметром Ø78 та фіксоване натяжне колесо діаметром Ø94 міцніші та нелегко ламаються. Крім того, він може витримувати надтверду арматуру завдяки сильному зусиллю затиску, що може допомогти зменшити відходи сталевої арматури.
1901,26 € Ar PVN 21%
13 Є в наявності
VEVOR 2-in-1 Electric Rebar Bender, 1700W Portable Hydraulic Rebar Bending Machine, 3 Bending Angle up to 1 Inch #8 (4-25mm) within 4 Seconds, High Power Steel Rebar Bender w/ Rich Accessory, RBC-25
M4I4MH0O
TSDDGJWQJ25M3H2JEV2
Bend with Precision – The Ultimate Rebar Bender
If you’re looking for a reliable and efficient tool for bending rebar, the Electric Rebar Bender is your ideal solution. Our hydraulic electric rebar bender can bend solid rebar in just a few seconds, making it especially valuable for construction projects that demand both speed and precision.
Achieve bending efficiency from 0° to 180° in just 3.5-4 seconds. Our versatile electric rebar bender, equipped with a standard foot pedal control switch, allows for hands-free operation and effortless bending.
Adjust the angle you need by moving left or right, and after angle adjustment is set accurately, ensure that the angle setting handle is fixed. When you find some abnormal during the operation, you must press down emergency stopped to close down the machine's operation.
The rebar bending machine features a 100% pure copper core high-power motor with double endurance for high conductivity, low noise operation, high-temperature resistance, and saves energy for a long time.
The foot switch connection to point 1,2 will make it more convenient to go to work. And when pressing the starting switch or the foot switch will bend the rebar to the angle you have set.
Product specification
- Номер моделі виробу
- RBC-25
- Розміри виробу
- 17.7 x 19.7 x 31.1 inches / 450 x 500 x 790 mm
- Колір
- Orange
- Маса нетто
- 289.5 lbs / 131.3 kg (including all accessories)
- Single Unit Net Weight
- 299.8 lbs / 136 kg
- Номінальна потужність
- 1700W
- Основні матеріали
- Cast Iron, Gear Steel, Module 40 Chrome
- Bending/Cutting Diameter
- 0.16-0.98 ± 0.02 inches / 4-25 ± 0.5 mm
- Bending Angle
- 0°-180°
| Вага | 155,00 кг |
|---|---|
| Розміри | 56,00 × 50,00 × 98,50 см |