VEVOR 3-в-1 ручний трубогиб для труб 6.35/9.5/12.7 мм, 180° гнучкий інструмент для міді/алюмінію, HVAC та авто ремонту
- 3-in-1 Design: This VEVOR tube pipe bender supports 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) pipes. It features a 40cm handle for even force distribution, reducing the risk of pipe deformation, flattening, or compression
- Wide Applications: Suitable for bending copper/aluminum/thin iron/thin stainless steel tubes with a wall thickness of 0.5~1.2mm. Note: If the tube wall thickness is less than 0.5mm, the pipe may be damaged
- 0-180° Bending: The lever pipe bender features clear angle scales and allows precise bending from 0° to 180°, ideal for automotive repair, HVAC maintenance, and copper pipe DIY projects
- Lightweight and Portable: Made of high-quality aluminum alloy, the tube bender is lightweight and portable. And the ergonomic rubber handle provides a comfortable, non-slip grip
- Effortless Operation: To bend pipes, adjust the tube hook to the corresponding position and insert the pipe into the appropriate bending groove and pipe hook. Then, hold the non-slip handle with both hands and press evenly with force
42,90 € Ar PVN 21%
Розпродано
Дата поповнення запасів невідома
Хочете отримати повідомлення, коли цей товар знову з'явиться в наявності?
VEVOR Pipe Tube Bender, 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm) OD, 3 in 1 Manual Lever Tube Bender, 180° Copper Aluminum Pipes Bending Tool for Automotive Repair, HVAC Air Conditioning
MCOJ5XYU
GGWGJSHY1438CMDRH001V0
Achieve Smooth and Precise Pipe Bending
VEVOR lever tube bender is ideal for bending copper, aluminum, thin steel, and stainless steel pipes with a 0.5-1.2mm wall thickness. It supports 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) pipe diameters, allowing precise 0-180° bending with even force distribution.
- Q: What kind of pipes does this pipe bender work with?
A: This pipe bender is suitable for metal hoses and thin-walled copper pipes.
- Q: Can it bend hard copper pipes?
A: Yes, but you need to anneal it to soften it before bending.
- Q: What wall thickness is this pipe bender suitable for?
A: This pipe bender is suitable for pipes with a wall thickness of 0.5-1.2mm. If the wall thickness is less than 0.5mm, the pipe may be damaged.
- Q: How to determine if the outer diameter of the pipe is suitable?
A: The pipe bender has three pipe holes that can be used to measure the outer diameter of the pipe. If the pipe diameter is too large, it cannot be used.
Product specification
- Bending Angle
- 0°-180°
- Applicable Pipe O.D.
- 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.)
- Pipe Wall Thickness
- 0.5-1.2 mm
- Основний матеріал
- 45# Steel + Aluminum Alloy + ABS + TPU
- Маса нетто
- 2.42 lbs/ 1.1 kg
- Applicable Pipes
- Copper Pipes, Aluminum Pipes, etc
- Розмір продукту
- 17.3 x 3.94 x 3 in / 440 x 100 x 75 mm
| Вага | 1,31 кг |
|---|---|
| Розміри | 45 × 11 × 11 см |
Тільки покупці, які увійшли на сайт і вже купили цей товар, можуть залишати відгуки.
Відгуки
Відгуків немає, поки що.